Case Study · Silicone Extrusion
Extruded Silicone Tubing
Clear silicone tubing, 4 mm outside diameter with a 1 mm wall, supplied cut to 250 mm and packed in numbered bags for a medical assembly line.
Problem
Four strips, four joints, four chances to leak
The tubing was in spec on diameter but varied in wall thickness along the length, which changed the flow rate in the assembly. The customer was sorting parts by hand.
Approach
One extruded profile, spliced corners
A new die was cut and the extrusion line run with in-line laser gauging, so wall variation was caught during production rather than after cutting. Cut length and bag numbering were added at the same time.
- In-line wall gauging
- Cut length check every 50 pcs
- Bag count verification
- Material certificate per batch
Result
One part, no hand assembly
Hand sorting stopped after the first batch. The part now runs twice a year against a blanket order, packed by bag number so the line can track consumption.
Drawings and customer name stay confidential.
More projects
Related case studies

Molded Plastic Enclosure
Two-part ABS enclosure with a gasket groove molded in, matched to a silicone seal.
View Case Study
Turned Stainless Component
Thin-wall turned part where wall thickness and run-out decided the process route.
View Case Study
Automation Fixture Bracket
Bracket machined from solid, flatness and hole position held for a locating fixture.
View Case StudyReady to Start Your Precision Component Project?
Send us your drawing and requirements for an engineering review and quotation.