Manufacturing Services · 02
Custom Silicone & Plastic Parts
Seals, gaskets, extruded profiles and molded parts — quoted on the process that fits the function, in the hardness, colour and finish the application asks for.
Silicone first
The part has to fit, seal, or protect. Everything else follows.
Silicone parts are usually small, cheap per unit, and expensive when they fail. We start from the function, then choose the process that reaches it at the lowest total cost.
Extrusion for continuous profiles, cords and tubing. Solid compression molding for thick sections, low tooling cost and short runs. Where the detail is finer than either process allows, we say so at review stage rather than after sampling.
Tooling is quoted separately and used only for your parts, so repeat orders are priced on material and machine time — not on a new set of tools.
Silicone capabilities
Two core processes, three part families
Each process has a volume range where it is the sensible answer. We quote the one that fits, and explain why.
Silicone Extrusion
Continuous profiles, cords, tubing and strips produced in custom hardness, colour and cut length.
Solid Silicone Compression Molding
Thick-section parts with moulded-in detail, durable rebound and consistent hardness batch to batch.
Custom Silicone Seals & Gaskets
O-rings, flat gaskets and profile seals matched to your mating surface and compression requirement.
Plastic capabilities
Components, housings and molded parts
Quoted per project once the drawing, material and annual volume are fixed.
Custom Plastic Components
Moulded and machined plastic parts for internal assemblies, covers and functional fittings.

Plastic Housings & Enclosures
Covers, boxes and housings with cut-outs, bosses and mounting features built into the tool.

Custom Plastic Molded Parts
Single and multi-cavity tools quoted with cycle time and cavitation, so the piece price is known before the tool is approved.

Part families
What we make
Four silicone families and one plastic family cover most enquiries. The drawing decides the process, not the other way round.
Extruded Profiles
Solid and sponge profiles cut to length, or spliced into rings.
Tubing & Cords
Small-diameter tubing and cord in custom wall and hardness.
Molded Gaskets
Thick-section gaskets and pads with moulded-in detail.
Seals & O-rings
O-rings and profile seals matched to the mating surface.
Plastic Housings
Covers and enclosures coordinated with the silicone part.
Materials
Compounds and colours
Food-grade and medical-grade compounds are available on request, with certificates from the compound supplier.
Silicone
- Solid silicone
- Fluorosilicone
- Sponge silicone
- Conductive silicone
- Food-grade
- Medical-grade
Plastics
- PP
- ABS
- PC
- PA6 / PA66
- POM
- TPE / TPU
- PVC
- PMMA
Colour & finish
- Pantone matching
- Colour chip approval
- Matte / gloss
- Post-cure
- Pad printing
- Laser marking
Inspection
Sample approval before production, not during it
Every silicone project is checked against an approved sample. What you sign off is what the production run is measured against.
- Hardness check per batch
- Section and wall thickness check
- Compression set on request
- Colour against the approved chip
- Compound certificate per lot
- Visual and flash inspection


Tooling
From drawing to approved sample
Tooling is where most silicone projects lose time. Ours is reviewed against the drawing before it is cut. Typical tooling lead time is 15–25 working days.
Send Your Drawing- DFM review of wall thickness, draft and radii
- Material and hardness recommendation
- Tool design and sample submission
- First article and dimensional report
- Production, and tooling maintenance for repeat orders
Related
Other services and examples
Precision CNC Machining
Metal housings, brackets and components to pair with a silicone or plastic part.
View Details
Machined Aluminium Housing
Twin-bore housing milled from solid, bores held concentric to the mounting face.
View Details
CNC Machining Design Considerations
Wall thickness, tool radius, tolerance and finish — the four choices that quietly decide what a machined part costs.
View DetailsNeed a seal, a cover, or a molded part?
Send the drawing or a sample. We will confirm the process, the tooling cost and the sample date.