Manufacturing Services · Silicone Parts

Custom Silicone Seals & Gaskets

O-rings, flat gaskets and profiled seals matched to the mating surface, compression set and media — cut, spliced or molded depending on size.

Black silicone O-rings in several diameters
Types
O-rings, flat gaskets, profile seals
Hardness
Shore A 30 – 80
Media
Air, water, oil, food contact
Temperature
-60 to 200 °C
Colour
Clear, black, custom
Volume
From 100 pcs

Overview

Built to drawing, not to a catalogue

The process is chosen from the function: extrusion for continuous profiles, compression molding for thick sections, molding for parts with moulded-in detail. Tooling cost and volume decide the rest.

Tooling is quoted separately and used only for your parts. Samples are approved before production starts, so every batch is measured against something you have signed off.

Capabilities

Processes

The drawing decides which process is used, not the machine list.

01

O-rings

Standard and non-standard sizes, spliced where the diameter demands it.

Sealing
O-rings
02

Flat gaskets

Cut or molded to the mating face, with bolt holes in place.

Flanges
Flat gaskets
03

Profile seals

Section matched to the groove and compression.

Housings
Profile seals
04

Food and medical grades

Compound confirmed in writing with the supplier.

Compliant
Food and medical grades

Materials

Stock we quote most often

Other grades are available on request. If a material is not listed, ask — the answer is usually a lead time, not a no.

Silicone

  • Solid silicone
  • Fluorosilicone
  • Sponge silicone
  • Food-grade
  • Medical-grade

Other compounds

  • TPE / TPU
  • PVC
  • Natural rubber

Colour & finish

  • Pantone matching
  • Colour chip approval
  • Post-cure
  • Pad printing

Quality

Inspection is part of the price, not an extra

Inspection scope and acceptance criteria are agreed at quotation and written into the purchase order.

  • Cross-section and hardness check
  • Compression set on request
  • Visual inspection
  • Compound certificate on request
Inspection at a qualified partner facility
Facility photo from qualified partner factory.
Production line at a qualified partner facility
Facility photo from qualified partner factory.

Before you send

What to include in a quote request

A complete request usually comes back quoted the same working day.

Send Your Drawing
  • 2D drawing (PDF) with tolerances and critical dimensions
  • 3D model (STEP / IGES / X_T) where available
  • Material grade and surface finish
  • Quantity, and annual volume if known
  • Target delivery date
  • Any inspection or documentation requirement

Ready to Start Your Precision Component Project?

Send us your drawing and requirements for an engineering review and quotation.

PDF STEP STP IGES IGS DWG DXF
Turned brass fittings and connectors produced to drawing